The LumiFlex COB LED strip uses an innovative technical solution to deliver a uniform line of light on the entire 5m length of the strip. This is achieved by using a continuous line of yellow phosphor that contains 576 LED chips per meter, a technology known as Chip on Board (COB). Furthermore, this approach offers an ultra wide view angle of 180 deg with a high quality of light, at CRI90.
The LumiFlex COB LED strip is the perfect solution to create continuous and very uniform lines of light from even very slim aluminum profiles, recessed or surface placed. In combination with our aluminum profiles found here you can create minimalist lighting fixtures for residential, office or commercial buildings with a good light output of 1121 lm/m.
The warm white LumiFlex COB lights with a cozy, intimate light with 2700K color temperature with very good light spectrum and CRI90, that we recommend being used for lines of light in living rooms and bedrooms. For business applications the warm glow creates a soft and personal, home like atmosphere in restaurants, hotels and retail stores.
Installation is as simple as it is versatile, thanks to the self-adhesive back, the LED strip adheres reliably to almost all surfaces and you can cut it every 56mm, with scissors.
LumiFlex COB Starter-Kit, the best value starter set for your lighting project
Our LumiFlex COB starter set offers you an efficient and flexible solution to easily illuminate your home or office. Whether you are planning decorative lines of light on the wall or ceiling, lighting behind the TV, indirect ambient lighting inside a cove light, lighting for your kitchen worktop or direct lighting for a room, our LumiFlex COB starter set provides you with the right products for the job. The set is made up of the following components:
The LumiFlex COB strip combines the flexibility of an LED strip with the high efficiency and light output of COBs and offers 5690 lumens of luminous flux at a colour temperature of 2700 K over a length of 5.04 metres. The strip can be operated with 24 V constant voltage thanks to pre-installed resistors. It is also dimmable and can be easily separated with scissors every 62.5 mm. Thanks to the self-adhesive back, the LED strip adheres reliably to almost all surfaces. For constant brightness, the strip should be connected to a power supply either in the middle or on both sides.
The dimmable 24V power supply from Meanwell has an output of 60 W and is therefore perfectly suitable for 5m of the LumiFlex COB LED strip.
With the help of the small 100 kOhm dimmer/potentiometer, which is connected between the power supply unit and the LED strip, the light of the COB strip can be dimmed.
The 5 m long two-core supply cable has a core average of 0.75 mm² each.
A really fantastic starter set at the best value, which can be further expanded and individualized with the accessories such as aluminum profiles.
Scope of delivery
One LumiFlex COB LED strip with a color temperature of 2700 K
One Meanwell NPF-60D-24 power supply (24 V - 60 W)