Constant Current LED Driver LUMITRONIX 21-48V input to 1>1500mA 4-42V DIM for the PowerController V2

Dimmable constant current source for operating constant current LED modules

This constant current LED driver is an extension of the versatile PowerController V2 control unit and can only be operated in combination with it. The output current is from 1 to 1500 mA for an input voltage of  21-48 VDC. 

Up to 4 constant current sources can be controlled by one PowerController V2. The required LED current is controlled and adjusted via the firmware of the PowerController V2.

The constant current extension is first and foremost aimed at luminaire manufacturers that need to control multiple LED modules or strips that are operated at constant current.

The following products, for example, are very suitable: PowerBar, SmartArray, LinearZ, MaxLine... also COBs and single LEDs can be operated. The constant current source is also dimmable, with dimming via PWM signal from approx. 50 mA to 500 mA and analog dimming from approx. 500 mA to 1500 mA. The transition between the two ranges is automatic.

Features of the constant current extension

• Input voltage 21 - 48 V (output 4 - 42 V)
• One constant current LED output up to 1500 mA
• Output current steplessly adjustable via PowerController V2
• In combination with PowerController V2 compatible with Casambi and DALI as well
• LED current is defined using the firmware of the PowerController V2
• Integrated 12V power supply for PowerController V2
• Combines PWM and analogue dimming
• Small dimensions (100 x 29 x 13 mm)
• Made in Germany

Applications of the constant current extension

• Control of LED modules or LED strips for constant current operation (such as PowerBar, SmartArray, LinearZ, MaxLine) or COBs and individual LEDs
• Industrial applications