LumiBar-28-3095 Nichia H6 LED Strip Zhaga Cold White 7800K CRI90 1162lm 175mA 37.9V 6.63W 28cm

LumiBar-28-3095 Nichia H6 Rigid LED Strip Cold White 7800K CRI90, Zhaga Module 28 cm

The LumiBar-28-3095 7800K combines excellent color rendering with high efficacy. Its 26 LEDs of the Nichia H6 series use a narrow-band red phosphor that raises color rendering to CRI90 without the efficacy loss usually associated with high-CRI LEDs. One 28 cm module delivers 1162 lm (4157 lm per meter) of cold white 7800K light at about 6.63 W, an efficacy of 175 lm/W.

Designed according to the Zhaga Book 7 standard, the LumiBar-28-3095 has a 20 mm wide rigid board with solderless terminals, is operated with a constant current LED driver and needs no additional heat sink. The short LED pitch produces uniform light without light spots behind a diffuser, and binning to a 5-step MacAdam ellipse ensures consistent cold white light. The 7800K light color creates a very cool, clear daylight white light with a bluish tint that maximizes alertness. The module is made in Germany and backed by a 5-year warranty.

Features of the LumiBar-28-3095 LED Strip 7800K

• 26 Nichia H6 series LEDs on a rigid 28 cm module
• Cold White 7800K with CRI>90
• 1162 lm per module, 4157 lm per meter
• Efficacy of 175 lm/W, energy efficiency class B
• Constant current operation: 175 mA at 37.9 V, 6.63 W per module
• Designed according to the Zhaga standard (Book 7)
• Solderless terminals, easy series connection
• No additional heat sink required
• Short LED pitch for uniform light without light spots
• Color consistency to a 5-step MacAdam ellipse
• Lifetime of more than 60,000 hours (L80B10)
• Dimmable with a dimmable driver
• Dimensions: 279.5 x 20 x 4.57 mm
• Made in Germany
• 5-year warranty

Applications of the LumiBar-28-3095 LED Strip 7800K

With its rigid, Zhaga-compatible format and high efficiency, the LumiBar-28-3095 7800K is designed for the following main applications:

• Linear lighting: LumiBar modules are mounted end to end in linear luminaires, recessed or surface-mounted profiles and pendant lights. For example, four LumiBar-28-3095 modules (1.12 m) fit a 1.2 m luminaire and deliver about 4648 lm at about 26.5 W. With the short LED pitch and a diffuser, the line of light is uniform. Read more in our guides on creating lines of light with LED strips and designing efficient LED linear lamps.
• Troffer and panel lighting: In troffers and LED panels for suspended ceilings, several LumiBar modules are mounted in parallel rows on the base plate behind the diffuser. The rigid, Zhaga-compatible modules are easy to fix and wire, making them a high-quality replacement for fluorescent tubes in laboratories and technical areas, where a very cool, clear light is required. More about LED strips and modules for troffer lights.
• High-quality white light: With a color rendering index of 90 and high efficacy, the LumiBar-28-3095 shows colors and materials naturally, while keeping energy consumption low. The 7800K color temperature gives a very cool, clear daylight white light with a bluish tint that maximizes alertness. Find out which color temperature suits your project in our guide Choosing the right color temperature for LED lighting.

Built Around the Zhaga Standard (Book 7)

The Zhaga Consortium is a global lighting industry association that defines interface specifications, called Books, so that LED light engines from different manufacturers can be used interchangeably in the same luminaire. Zhaga Book 7 covers linear and square LED modules for indoor lighting that are operated with a separate LED driver and are mounted in the luminaire, and replaced, by professionals. It specifies the mechanical, thermal, photometric and electrical interfaces between the LED module and the luminaire, and defines 18 module categories by their maximum outer dimensions. In 2023, Book 7 became the first Zhaga specification to be published as an IEC standard, IEC 63356-2. More information is available on the Zhaga Book 7 page.

The LumiBar is designed according to Zhaga Book 7. With its dimensions of 279.5 x 20 mm, the LumiBar fits the Book 7 category L28W2, which defines a maximum module size of 280 x 24 mm.

• For luminaire manufacturers: a luminaire body designed around the Zhaga form factor accepts standardized modules, so you can switch to newer, more efficient LED generations or a second source without redesigning the luminaire.
• For maintenance and upgrades: existing luminaires with Zhaga Book 7 modules can be serviced or upgraded with LumiBar modules, extending their service life.
• For sustainable lighting: replaceable, standardized light engines make luminaires serviceable and support the replaceability of light sources required by the EU Ecodesign Regulation (EU) 2019/2020.

Technical Data of the LumiBar-28-3095 LED Strip 7800K

• Article number (SKU): 40489
• Equivalent model: LinearZ 280-26 7800K
• LED manufacturer: Nichia (H6 series)
• Light color: Cold White, 7800K
• Color rendering index: CRI (Ra) >90
• Binning: 5-step MacAdam ellipse
• Photometric code: 978/559
• Luminous flux: 1162 lm per module, 4157 lm per meter
• Efficacy: 175 lm/W (mains voltage luminous efficacy 190 lm/W)
• Beam angle: 120°
• Lifetime: >60,000 h (L80B10C1)
• Operating mode: Constant current, dimmable
• Operating point: 175 mA at 37.9 V
• Power: 6.63 W per module
• Number of LEDs: 26 per module
• Dimensions: 279.5 x 20 x 4.57 mm (L x W x H)
• Weight: 18 g
• Form factor: Designed according to Zhaga Book 7, category L28W2
• Connection: Solderless terminals, 0.75 mm² (AWG 18) recommended
• Operating temperature at Tc: -40°C to +85°C
• Ambient temperature: -40°C to +50°C
• Storage temperature: -40°C to +100°C
• Certifications: CE, RoHS, REACH
• Photobiological safety (EN 62471): Risk group RG0
• Energy efficiency class: B
• Photometric reference: Values measured at TJ = 25°C, ±10%

Installation and Operation

• Mounting: mount the module flat on the luminaire body, ideally on a metal surface for good heat transfer; no additional heat sink is required. Do not bend the rigid circuit board and avoid mechanical stress on the components.
• Connection: the module has solderless push-in terminals. Strip the wire insulation at the connection point and insert the wire; we recommend a conductor cross-section of 0.75 mm² (AWG 18).
• LED driver: operate the modules with a constant current LED driver of 175 mA. Several modules can be connected in series: the current of the string stays the same, and the voltages add up. For example, 4 modules of 28 cm in series (about 1.12 m) need 151.6 V, which must lie within the output voltage range of the driver. Connect only modules of the same length in one series string. For dimming, use a dimmable driver.
• Handling: observe standard ESD precautions, keep the module away from aggressive chemicals, and store and operate it at 10% to 60% relative humidity.
• Safety: the driver must provide short-circuit, overload and overtemperature protection, and installation must comply with all applicable electrical and safety standards and should be carried out by a qualified electrician.

Why the LumiBar-28-3095 Outperforms Low-Cost LED Modules

• LED quality: we use only brand-name LEDs from Nichia, the Japanese LED market leader whose researchers invented the blue and white LED technology, with full manufacturer datasheets and performance tested in the lab and in real applications.
• Production quality: the modules are assembled in Germany on an ISO-certified line with high-speed automatic placement and vapor phase soldering under a protective gas atmosphere, which prevents oxidation and cold solder joints and improves the thermal connection between LED and circuit board, an important factor for LED lifetime. Laser bar codes ensure traceability.
• Realistic specifications: all values are measured at a junction temperature of 65°C, so the performance in our datasheet matches what you get in a real luminaire.

Who We Are: Ledrise, Professional LED Strips Made in Germany

Ledrise is the international online shop for high-performance LED strips and modules that we develop and manufacture in our own production facility in Germany and ship directly from there. With more than 20 years of experience in LED technology, our team of more than 70 people in Germany, Hong Kong and Romania has gained extensive application knowledge across many sectors, and thousands of business customers and consumers on five continents rely on us as their LED technology partner.

We use only LEDs from market leaders such as Nichia, Seoul Semiconductor, Cree, Samsung and ams OSRAM. Beyond standard products, we design and prototype custom LED modules, select and integrate optics, housings and drivers, and test and validate every solution in our in-house measuring and testing laboratory, supporting you from the first lighting concept to serial production.

Our Quality Promise

• Certified quality: our quality management is certified to DIN EN ISO 9001 and covers every step, from product development to customer service. Our manufacturing center in Germany is also certified to ISO 14001 for environmental management and ISO 45001 for occupational health and safety.
• Reel-to-reel manufacturing, unique in Europe: our fully automated reel-to-reel flex line uses plasma direct metallization to produce robust, flexible circuit boards in continuous lengths of up to 100 meters, with fewer interconnections and less material waste.
• Precision at every step: automated solder paste printing with inline inspection, high-speed ASM SIPLACE component placement, controlled reflow soldering, and automatic optical inspection that detects missing, offset or misaligned components.
• Full traceability: production batches are marked and tracked with laser-engraved barcodes.
• Honest data: the performance values in our datasheets match those in real-world applications.
• Long-term security: a 5-year warranty on this LED strip (see our warranty terms) and professional support for your lighting projects.

Learn more about Ledrise and our reel-to-reel flexible LED strip manufacturing in Germany.