LumiFlex-20-4080 Seoul LED Strip 5.6 m reel 28 cm wide, ultra-high luminous flux, up to 5785lm/m for less than 39 W power consumption
The LumiFlex-20-4080 LED strip, produced in our new Flex production line in from Germany, pushes performance limits for multi-row flexible strips to new heights. With an amazing luminous flux of up to 5800 lm per meter, the 5.6 m long LumiFlex with 980 LEDs is by far one of the brightest flexible strips on the market. The constant voltage design at 24VDC allows for easy installation with low energy consumption of 39 W per meter.
Produced in a reel-to-reel process, the 5600 x 280 mm LumiFlex-20-4080 uses high performance Seoul 3528 LEDs with a color temperature of 3000 K. The entire reel consists of 20 square modules with 49 LEDs at 280x280 mm, which can even be cut after each row of 40 mm.
Easy to install with Plug & Play design
In contrast to rigid modules, which have to be fixed with screws in large numbers depending on the nature of the luminaire, the LumiFlex-20-4080 LED modules can be glued into the body in the desired length thanks to the self-adhesive back. A further advantage over modules based on rigid boards is the cabling. Five LumiFlex-20-4080 modules can be operated over the maximum length of 5.6 meters with one power feed at 24VDC. This makes time-consuming activities such as screwing and wiring a thing of the past.
Installation can be easier than with other flexible strips also, as soldering or other connectors are also not required. Each unit of 28 cm has two sets of plug & play connectors.
Features of the LumiFlex-20-4080 LED Strip
980 LEDs over entire length; 49 LEDs per segment of 28 x 28 cm
Seoul Semiconductor 3528 LEDs with 54000h lifetime at L70B50
5.6m length with 20 modules, 28 cm wide
7 LEDs per row
Color temperature: 3000 K
Luminous flux total: 32400lm or 5800 lm/m
Power: 218W or 38.92W/m at 24VDC
Zhaga-compatible
Efficiency up to 148 lm/W
Divisible after every 40 mm with connectors for each 280mm module
Easy installation due to double-sided, thermally conductive adhesive tape
Production in reel-to-reel process (R2R)
Base material: PET
Dimensions: 5600 x 280 x 2.8 mm
Beam angle: 120°
Made in Germany
5 years warranty
Features of one LumiFlex-20-4080 LED module
49 Seoul Semiconductor 3528 ultra-power SMD LEDs
28 cm length with plug and play connectors at each end
Constant voltage driver required at 24 VDC
1620lm per module at 10.92W
Maximum number of modules in one row: 20 that require a driver of 218W at 24VDC
Applications of the LumiFlex-20-4080 flexible LED strip
Linear luminaires
Cove lighting
Decorative lighting
Trade fair construction
General lighting
Commercial lighting
Advertising signs
Backlighting
Kitchen Lighting
Backlighting of translucent surfaces such as: barrisol stretch ceiling, plexiglas, stone, marble etc
Illuminated showcases
Construction of light bodies or LED panels
General lighting with a long service life in shops, offices, clinics, clinics or private homes