The new PowerController V2 Casambi is a powerful app enabled control unit for Tunable-White, Dim2Warm or colour changes. It offers a wide range of possibilities with a minimum size of only 100 x 29 x 13 mm.
The connected modules, strips or luminaires can be conveniently controlled via smartphone or tablet. This is made possible by the built-in Casambi module, which transmits the signals from the app directly to the connected light source via Bluetooth. The Casambi app is available free of charge for both iOS- and Android-based devices.
Four output channels provide a great deal of flexibility when implementing a wide variety of lighting scenarios.
This means that the PowerController V2 Casambi can be used as a single-channel control unit, dual-channel control unit, three-channel control unit or four-channel control unit.
In practical terms this means you can control up to 300W of 10-30VDC LED modules in:
Easy installation due to minimum size and connection system
The slim format allows installation in almost any type of luminaire, also due to the practical terminals. A total of up to 10 A can be switched via the outputs. The PowerController V2 allows the control of constant voltage LED modules.
The controller has clear, easy to use input and output ports while the connection to the LED module can be easily made in conjunction with the five wire tool free connector from Wago (article number 33736).
Control of multiple constant current LED modules is also possible
The Powercontroller V2 unit is compatible with the new extension constant current LED driver, article number 34722. With this driver you can control up to 4 groups of lightsources at a constant current of 1-1500mA and 4-42 V, such our LinearZ LED modules.
|Manufacturer Product Code||32157|
|Dimensions: Length (cm)||10|
|Availability beyond shown stock:||YES|